Speedhut Auxiliary Shift-Light_Warning-Light Manuel d'utilisateur télécharger pdf

Shift light / Warning light instructions

Plug this end into right side of gauge.

1. Cut off the stereo end that would normally plug into a Speedhut gauge.

2. Strip back the insulation to expose the red wire, black wire, and unshielded wire.

3. Join the black and red wires together.

4. Connect the red/black wires to a 12volt source to power on the LEDs.

5. Connect the unshielded wire to a good ground.

1. Turn off gauge power.

2. Plug shift light into

right side

of gauge.

3. Turn gauge power back on.

4. Follow gauge instructions for setting

the set -points and brightness

WARRANTY - Speedhut inc. warrants to the consumer for a period of 5 years from the date of purchase that the product will be free from defects in materials or workmanship.

Speedhut warrants to the consumer for a "LIFE-TIME" that the gauge circuit board will be free from defects in materials or workmanship Please contact Speedhut service dept.

If you have a problem with this product. suppor[email protected]

Note: DO NOT plug

into button jack.

Gauge Top

OPTIONAL SETUP: If you wish to use the Shift-Light/Warning-Light in a dierent application then you do have

the option to connect it directly to a 12volt source to power on the LEDs.

(Red)

(Black)

(Unshielded Wire)

(Unshielded Wire) 1

Résumé du contenu

Page 1 - (Unshielded Wire)

Shift light / Warning light instructionsPlug this end into right side of gauge.1. Cut off the stereo end that would normally plug into a Speedhut gaug

Commentaires sur ces manuels

Pas de commentaire

Speedhut Auxiliary Shift-Light_Warning-Light Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Speedhut Auxiliary Shift-Light_Warning-Light. Speedhut Auxiliary Shift-Light_Warning-Light User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Speedhut Auxiliary Shift-Light_Warning-Light